Belle and I have been working on the DW at full height for six days now, and the mini-sessions seem to finally be bearing fruit. Today, she hit 5 out of 6 times. At our next session, I will start Belle from a sit stay off the DW and see if she can hit. Once she can do that reliably, I will re-introduce opening sequences, exit turns and me actually running while she's on the DW.
Tuesday, April 9, 2013
Saturday, April 6, 2013
Time for Some Jumping Sequences
The ground was finally dry enough for Belle to do some jumping. I downloaded a set of four exercises that Daisy Peel made available to her subscribers a few days ago, and spent a few days working on them in between DW practices. In addition to the course maps and handling suggestions, Daisy provided a video demonstrating her suggestions for running the sequences. (You can become a subscriber by going to Daisy's website.)
The exercises provide practice for blind crosses and Ketschker turns. The first time, I tried Exercise #1, I wasn't far enough ahead to get in the blind cross. The second and third times, I put it after the wrong jump. When I realized my error, I went out and did it the way Daisy suggested. It was ever so much easier to do the blind cross where she suggested, and it was as fast as our first run where I didn't do any change of sides.
In the first exercise, Daisy is able to go into the pinwheel and get in a blind cross two jumps later. However, the only way I could get the blind cross in was to stay out of the pinwheel pocket. Daisy wrote an article for this month's issue of Clean Run in which she discusses location cues. One of the location cues she writes about is for a pinwheel and the slippery slope of stopping on the take-off side of the first jump. Hmm, but I do that all the time, and Belle seems to understand when I want the pinwheel, when I want a wrap of the first jump and when I want her to do a 180. So I must be doing something that lets her know what I want.
The article really got me to thinking though and I decided to try Ashley Duncan's "Turn and Burn" course at Agility U. I may or may not agree with how he trains and/or cues his dog for turns, but it should provide a logical progression with which to work out my cues.
Just a little note about the exercises in the video. I wouldn't necessarily handle these sequences as suggested in a trial setting if for no other reason than if I tried to run so aggressively, I probably wouldn't make it to the finish line. However, the point of practice sequences is to try things that I wouldn't think of on my own and/or that are out of my comfort zone.
The exercises provide practice for blind crosses and Ketschker turns. The first time, I tried Exercise #1, I wasn't far enough ahead to get in the blind cross. The second and third times, I put it after the wrong jump. When I realized my error, I went out and did it the way Daisy suggested. It was ever so much easier to do the blind cross where she suggested, and it was as fast as our first run where I didn't do any change of sides.
In the first exercise, Daisy is able to go into the pinwheel and get in a blind cross two jumps later. However, the only way I could get the blind cross in was to stay out of the pinwheel pocket. Daisy wrote an article for this month's issue of Clean Run in which she discusses location cues. One of the location cues she writes about is for a pinwheel and the slippery slope of stopping on the take-off side of the first jump. Hmm, but I do that all the time, and Belle seems to understand when I want the pinwheel, when I want a wrap of the first jump and when I want her to do a 180. So I must be doing something that lets her know what I want.
The article really got me to thinking though and I decided to try Ashley Duncan's "Turn and Burn" course at Agility U. I may or may not agree with how he trains and/or cues his dog for turns, but it should provide a logical progression with which to work out my cues.
Just a little note about the exercises in the video. I wouldn't necessarily handle these sequences as suggested in a trial setting if for no other reason than if I tried to run so aggressively, I probably wouldn't make it to the finish line. However, the point of practice sequences is to try things that I wouldn't think of on my own and/or that are out of my comfort zone.
Friday, April 5, 2013
Hitting The Wall
Now that my dog walk is no longer adjustable, Belle and I are tackling the problems that the full height DW presents. I know this is the stage where a lot of people give up, and I can see why. It's like the weeks of work we did at lower heights never happened. I had hoped to go to a NADAC trial on the 20th, but if we can't make some definite progress by late next week, I won't bother to enter.
My current plan is to do 6 reps two or three times each day. I'm not filming these sessions, but I am keeping detailed notes so I know where to resume at the next session, and so I can see if we're making any progress. So far we're stuck at a starting point about 8" from the beginning of the down ramp.
Wish us luck.
My current plan is to do 6 reps two or three times each day. I'm not filming these sessions, but I am keeping detailed notes so I know where to resume at the next session, and so I can see if we're making any progress. So far we're stuck at a starting point about 8" from the beginning of the down ramp.
Wish us luck.
Wednesday, April 3, 2013
A New Dog Walk Base
Last year, I really, really wanted to buy an
aluminum dog walk with wheels. However, I just couldn't justify spending
$1,200+ on it. My email friend, Bill in Minnesota, sent me photos of the
dog walk he designed. As Bill describes it, it is basically just an
over-sized sawhorse. Here's one of Bill's photos:
The middle section of my dog walk was supported by two sawhorses that were easily put together using pre-made brackets. The only problem (other than schlepping the board and the two sawhorses around for mowing and course changes) was that the dog walk was rather unstable from side to side. In the video, the end planks aren't attached, but even when they are, the instability persists.
Ed went to Menard's on Monday and bought the
lumber we needed. Tuesday, he brought the center plank up from the field
and we began work. I went with a standard sawhorse angle of 20° and let
the web do my computing for the leg length. I decided to make BC =
46.5" to allow for the 1.5 inch thickness of the cross plank.
The first step was anchoring the short pieces
of 2x4 to the ends of the plank. Ed used three big bolts to secure
them. While he was doing that, I used a miter saw to cut the top of each
of the legs. Then I measured 49.5" along each edge and used the
miter saw to cut them to the correct length. Because Ed was a tool and
die maker and I'm a quilter, we couldn't help ourselves and we also put a 20°
on each end of the pieces to which the legs would be attached.
This actually was helpful when it came time
to attach the legs since it gave us a little more of a guide to eyeball the leg
angles. Ed insisted on using two bolts on each leg.
Once all four legs were attached to the
plank, we put the whole thing on the ground upside down so it would be easier
to put on the two stretchers. Then we put the whole thing back up on the
sawhorses for Ed to work on the center braces.
Fortunately, we had leftover truss brackets
so Ed didn't have to put anymore bolts through the DW plank.
Instead he used two truss brackets.
Cutting the cross braces was the most tedious
part of the job. There is no easy way to determine the angles, so it was
trial and error. By the second brace, I discovered that I had to cut the
piece about two inches shorter than the line I scribed with the cross braces
resting on the 2x4 leg stretchers. To make a more flush joint, I changed
the angle by a degree or so.
We completed the job after lunch today, and then were faced with the daunting task of getting our Paul Bunyan sized sawhorse out to the field. It weighed quite a bit because I opted for green-treated lumber so I wouldn't have to paint the legs or worry about them rotting. But a green 2x4 is really, really heavy. Surprisingly, we were able to carry it the 200' feet or so to the field without injury or heart attack. However, we will be adding a set of wheels in the future.
The middle section of my dog walk was supported by two sawhorses that were easily put together using pre-made brackets. The only problem (other than schlepping the board and the two sawhorses around for mowing and course changes) was that the dog walk was rather unstable from side to side. In the video, the end planks aren't attached, but even when they are, the instability persists.
The first step was anchoring the short pieces
of 2x4 to the ends of the plank. Ed used three big bolts to secure
them. While he was doing that, I used a miter saw to cut the top of each
of the legs. Then I measured 49.5" along each edge and used the
miter saw to cut them to the correct length. Because Ed was a tool and
die maker and I'm a quilter, we couldn't help ourselves and we also put a 20°
on each end of the pieces to which the legs would be attached.We completed the job after lunch today, and then were faced with the daunting task of getting our Paul Bunyan sized sawhorse out to the field. It weighed quite a bit because I opted for green-treated lumber so I wouldn't have to paint the legs or worry about them rotting. But a green 2x4 is really, really heavy. Surprisingly, we were able to carry it the 200' feet or so to the field without injury or heart attack. However, we will be adding a set of wheels in the future.
Subscribe to:
Posts (Atom)